How do I connect to Windows ME

If you are using the PAD-5 USB IR adapter

1) Is the PAD-5 cable connected securely to your computer's USB port?
Firmly but gently push the connectors into the IR adapter and computer ports to make sure they are plugged in as far as they will go.
2) Use the following procedure to make sure that the PAD-5 driver is correctly installed on your computer.

1. Select [Start] [Settings] [Control Panel].
2. Double-click the [System] icon.
3. Click the [Device Manager] tab.
4. Double-click [Network adapters]. Check if [CASIO PAD-5] is in the device list. If it isn't, it means the PAD-5 driver is not installed correctly.
5. If [PAD-5] is not shown under [Network adapters] in step 4, disconnect the ends of the PAD-5 cable and re-connect them securely and correctly. The PAD-5 will be detected automatically if it is connected correctly. Follow the steps provided in the WQV Link 3.0 user's guide to install the PAD-5 driver.
6. If the PAD-5 is not detected in step 5, perform the steps in the WQV Link 3.0 user's guide to uninstall and then re-install the PAD-5 driver.

If you are using the PAD-2B 9-pin serial IR adapter

1) Is the PAD-2B cable connected securely to your computer's serial port?
Firmly but gently push the connector into the port to make sure it is plugged in as far as it will go.
2) Use the following procedure to check the port number where the IR adapter is connected and the IR transceiver name.

1. Select [Start] [Settings] [Control Panel].
2. Double-click the [Network] icon.
3. Select the [Configuration] tab.
4. Double-click [ESI-9680 XTNDAccess Serial Infrared Device], and then click the [Advanced] tab.
5. Select [Serial Port] and check the COM port number where the IR adapter is connected. If there are multiple COM ports, make sure you select the correct one.
6. After you finish making the changes you want, restart your computer.

3) Check the settings of your computer's COM port.
If your computer has both a built-in IR port and modem, its COM port may be disabled. Use the following procedure to check your computer's COM port setting.

1. Select [Start] [Settings] [Control Panel].
2. Double-click the [System] icon.
3. Click the [Device Manager] tab.
4. In the Device Manager list, double-click [Ports (COM & LPT)], and look at the port number where the PAD-2B is connected. If [Communication Port (COM1)] is indicated, it means that the COM port number is COM1. There may be multiple COM port numbers indicated.

4) Check your special utility/BIOS setup.
If your computer has a special utility for changing the BIOS setup, you may need to use the special utility to change your serial port (COM port) settings. If you have such a computer, you should use the setup screen of your special utility to change the setting of the built-in IrDA port from "Disabled" to "Enabled." The actual procedure you should use to check and change the setting depends on your computer model. See the documentation that came with your computer or contact the manufacturer of your computer for more information.
If you are using your computer's built in IrDA port

1) Make sure the built-in IrDA port is enabled.
Some computer models have a built-in IrDA port whose settings can be configured using a special utility or by changing BIOS settings. If you have such a computer, you should use the setup screen of your special utility to change the setting of the built-in IrDA port from "Disabled" to "Enabled." The actual procedure you should use to check and change the setting depends on your computer model. See the documentation that came with your computer or contact the manufacturer of your computer for more information